close

4424RF

search
search close

Last searched

HELP

Can we help you?

Contact us:

Calling to +34 941 34 08 85

Monday to Thursday from 8:00 am to 18:00 pm

Friday from 8:00 am a 15:00 pm

Chat messages

You can contact one of our technicians in the chat below

Consult a technician

Our technicians will reply as soon as possible. You can send a message to:

info@juba.es
Click to enlarge

Clothing Polietileno CAT III - 1188B3456PRO STEELGEN

STEELGEN 5000 disposable coverall for chemical risks type 3, 4, 5 and 6. Electrostatic properties (EN 1149-5), against infective agents (EN14126) and against radioactive contamination (EN 1073-2).

Normative

close

General requirements for protective clothing.

The general requirements for protective clothing are specified in international standard EN ISO 13688:2013. This standard specifies general performance requirements for ergonomics, innocuousness, size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing. Garments must be designed and manufactures to offer the user maximum comfort. The components and materials used must not damage the user or cause allergic reactions, irritation or injuries. Sizes range must have the body measurements.

Should be used in combination with another standard that includes specific protection requirements. Therefore, a CAT I, II or III garment should be certified to standard EN ISO 13688:2013+A1:2021 + another standard.

close
pictograma 1149-5

Antistatic protective clothing

  • Prevents the concentration of electrostatic charges which could act as a source of ignition in an atmosphere classified as explosive.
  • The surface resistance of the material or the electrostatic charge dissipation time is assessed.
TYPE 6B
close
pictograma 13034

Limited protection against liquid chemical products

  • Protection against accidental splashing of liquid chemicals with low hazard or small exposure.
  • The suit is subjected to a liquid spray from 4 nozzles each with a flow rate of 0.4 l/m for a minute at a distance of 1.5 m.
  • Permeation tests are not performed.
TYPE 5B
close
pictograma 13982

Chemical protection against airborne solid particles

  • Protection against hazardous chemical particles.
  • The suit is subjected to an environment with a 0.6 μm saline solution in a booth.
  • A tester simulates daily activity on a treadmill by means of three exercises within the booth.
  • The leak of particles to the inside is assessed [Class].
close
pictograma 1073

Unventilated protective clothing against contamination by radioactive particles

  • Not applicable to ionising radiation.
  • Protection against particles with residual nuclear contamination.
  • Its leak tightness is assessed as for the Type 5 garment [Class].
close
pictograma 14126

Protective clothing against infective agents

  • The infective protection is identified by adding a "B” after the type of chemical protection (6B, 5B, 4B, 3B...).
  • The penetration of infective agents is tested by mechanical contact with contaminated liquids, resistance to penetration of contaminated liquid aerosols and resistance to the penetration of contaminated solid particles [Classes].
TYPE 3B y TYPE 4B
close
pictograma 14605 tipo 3pictograma 14605 tipo 4

Liquid-tight protection against liquid chemicals / Spray-tight protection against liquid chemicals 

Type 3:

  • Protection against a pressurised hazardous liquid chemical jet.
  • The suit is tested using a nozzle that sprays a pressurised liquid jet at 1m to the vulnerable parts of the suit (zips,seams, etc.).
  • Both the material and the seams of the suit are tested.
  • The seams of the garment must be completely sealed.
  • Additional permeation test indicating permeation detection time [Class].

Type 4:

  • Protection against a spayed hazardous liquid chemical.
  • The suit is subjected to a liquid spray from 4 nozzles each with a flow rate of 1 l/m for a minute at a distance of 1.5 m.
  • The seams of the garment must be completely sealed.
  • Additional permeation test indicating permeation detection time [Class].

Materials

Polietileno

Polipropileno

Family

Disposable

Product

Disposable coveralls

Colors

Yellow

Sizes

S

M

L

XL

XXL

3XL

Composition

  • with hood, front zip fastening with Velcro over-flap. Elastic cuffs and ankles. Heat-sealed seams. It has a chin guard that helps minimize the risk of contamination. Hold-fingers: helps to maintain the sleeve when working above the head.

  • Material: 60% Polypropylene + 40% Polyethylene (82gr/m2).

Description

  • Industrial maintenance.

  • Chemical industry.

  • Handling particles: fibreglass, toxic dust, asbestos, etc.

  • Industrial cleaning: tanks, etc.

  • White rooms.

  • Spray painting.

  • Jobs with a biological risk: farming, vets, organic decomposition, waste, food, etc.

  • Pharmaceutical sector.

  • Ship-building.

  • Confined space.

Documentation

article Data sheet article Declaration of comformity
Company

Manufacturers specialised in work gloves since 1954, offering the most assorted and complete guide for the total protection of the hands, along with a wide ranging workwear catalogue designed to cover the needs and risks of the workers.

Contact with us

call+34 941 340 885

emailinfo@juba.es

location_onAvenida Logroño 29-31,
26250 Santo Domingo de la Calzada,
La Rioja (España)

Schedule

schedule Monday to Thursday from 8h. to 17h.
Friday from 8h. to 15h.
Closed on Saturdays and bank holidays.

Logo footer
Close

Juba SSP

Fields with (*) are required

JUBA© DATA PROTECTION INFORMATION

Purpose: To answer your queries and send you commercial information on our products and services, including by e-mail. Legitimisation: Consent from the interested party. Recipients: No data disclosure has been envisaged. Rights: You can withdraw your consent at any time, and also access, rectify, remove your data and other rights on rgpd@juba.es. Additional information: You can extend the information in the link for the Privacy Policy.

I have read and accept the privacy policy