Gloves for Aerospace Construction. Small or large pieces handling with medium to high cut risk, protection against impacts on the back of the hand, inspection, storage and transport.

Nyon® shell with PU palm and fingers coating.
Seamless Nylon® + Lycra® fibre glove with grey nitrile coating on palm and fingers
Nylon shell with nitrile palm coated.
Nylon®/Elastan glove coated with nitrile combinated with water-based PU and T-Touch® technology
Seamless Nylon® + Elastan glove with NFT nitrile coating on palm and fingers
15 Gauge Nylon® drivers fully coated with nitrile foam and with elastic open end.
Nylon® string knit seamless glove
Nylon® string knit seamless glove
Nylon® string knit seamless glove
Dyneema® mixed with Nylon® and Lycra® glove, made with Dyneema® Diamond Technology 3G12 and latex coating with ANR (Advanced Natural Rubber) tecnology on palm.
Seamless polyester glove with PU coating
Nylon®/Lycra® glove with fully nitrile foam coating on palm and fingers
Nylon® shell with ultralite Nitrile foam on palm.
Nylon shell with nitrile palm knuckle coated.
Nylon shell with nitrile palm fully coated.
Nylon shell with nitrile palm coated. Header card.
Semaless Nylon® coated with microporous nitrile foam on palm and fingers
Gauge Nylon® drivers fully coated with nitrile foam and with elastic open end.
13 gauge Nylon® shell with PU coating on palm and fingers. Reinforced fingertips.
18 gauge Nylon® shell with Polyurethane palm and finger coating.
Nylon® shell with PU fingertips coating.
15 gauge nylon® shell with pu palm coating.
Rough PVC Coral® coated glove with double water-based PU coating sleeve
Unsupported neoprene glove.
Unsupported neoprene gloves.
Unsupported light nitrile glove
Bicolor supportless neoprene on heavy latex glove
Gauntlet with Nylon® support and double biopolymer coating (Nitrile + water-based PU). The first coating is fully water-proof. The second coating is made of porous nitrile with T-Touch¿ Technology on palm and thumb.
Dyneema® fibre glove mixed with carbon fibre, Nylon and Lycra fibre. Produced with Dyneema Diamond 3G12 technology and PU coating on palm and half-back.
Nylon®/Lycra® shell with ultralite nitrile foam coating on palm and fingers. Nitrile dots on palm.
clear
headset_micContact

Call us on our Customer Service hotline:
+34 941 340 885

Our Customer Service hours are Monday to Thursday from 8 am to 6 pm and Fridays from 8 am to 3 pm (we are closed on Saturdays and public holidays).

Of, if you prefer, you can send us your query using this form:

Uses and solutions