Gloves for Aeronautical Construction. Small or large pieces handling with medium to high cut risk, protection against impacts on the back of the hand, inspection, storage and transport.

Nyon® shell with PU palm and fingers coating.
Seamless Nylon® + Lycra® fibre glove with grey nitrile coating on palm and fingers
Nylon shell with nitrile palm coated.
Nylon®/Elastan glove coated with nitrile combinated with water-based PU and T-Touch® technology
Seamless Nylon® + Elastan glove with NFT nitrile coating on palm and fingers
15 Gauge Nylon® drivers fully coated with nitrile foam and with elastic open end.
Nylon® string knit seamless glove
Nylon® string knit seamless glove
Nylon® string knit seamless glove
Dyneema® mixed with Nylon® and Lycra® glove, made with Dyneema® Diamond Technology 3G12 and latex coating with ANR (Advanced Natural Rubber) tecnology on palm.
Seamless polyester glove with PU coating
Nylon®/Lycra® glove with fully nitrile foam coating on palm and fingers
Nylon®/Lycra® shell with ultralite nitrile foam coating on palm and fingers. Nitrile dots on palm.
Nylon® shell with ultralite Nitrile foam on palm.
Nylon®/ Spandex® shell with micro foam nitrile coated
Nylon®/ Spandex® shell with micro foam nitrile fully coated
Nylon®/ Spandex® shell with micro foam nitrile half coated and Nitrile dots on palm.
Cotton/elastane (spandex) glove with sandy nitrile coating.
Nylon shell with nitrile palm knuckle coated.
Nylon shell with nitrile palm fully coated.
Nylon shell with nitrile palm coated. Header card.
Semaless Nylon® coated with microporous nitrile foam on palm and fingers
Nitrile coated glove on cotton support
Nitrile coated glove on cotton support
Nitrile coating glove, lined with cotton.
Nitrile coated glove on cotton support
Nitrile coated glove on cotton support
Cotton interlock shell with nitrile coating. Yellow color.
Cotton interlock shell with nitrile coating. Blue color.
Cotton interlock shell with full nitrile coating. Blue color.
Heavy nitrile glove on cotton support
Heavy nitrile glove on cotton support
Heavy nitrile glove on cotton support
Heavy nitrile glove on cotton support and safety sleeve
Heavy nitrile glove on cotton support and safety sleeve
Seamless Nylon® coated with microporous nitrile foam on palm and fingers
Nylon liner with microporous nitrile foam half coating
Nylon sheel with microporous nitrile foam palm and fingers coating. Terry loop lining.
Seamless Nylon® coated with PVC on palm and fingers
Gauge Nylon® drivers fully coated with nitrile foam and with elastic open end.
Driver style split cuff glove.
Grain cow and split leather driver glove
Grain cow leather driver glove
Grain cow leather driver glove
Grain cowhide leather driver glove.
Grain cow leather driver glove
Grain cow leather docker glove
Grain cow leather docker glove
Grain leather glove. Reinforcement on palm. Header card.
Water-repellent grain cow leather glove lining with Thinsulate®
Water-repellent grain cow leather glove
Water-repellent grain cow leather glove lining with Thinsulate®
Water-repellent grain cow leather glove lining with Thinsulate®
Grain cow leather and canvas docker glove
Premium grain cow leather with canvas back and safety cuff
Extra grain cow leather and canvas docker glove
Split leather glove
Split leather glove
Grain cow and split leather glove
Grain cow and split leather glove
Split leather and canvas glove
Split leather and canvas glove. Reinforcement in knuckles and fingertips
Double split leather palm and forefinger with canvas back
Double split leather palm and forefinger with canvas back
Double split leather palm and forefinger with canvas back
Double split leather palm and forefinger with canvas back
Double split leather palm and forefinger with canvas back with elasticated cuff.
American split leather extra qaulity glove with half back and cuff made of cotton, inner reinforcement on palm and fingers.
Croupon split leather and canvas glove
Mixed split and grain leather docker glove, 27 cm long
Mixed split and grain leather docker glove, 32 cm long
Cow croupon split leather docker glove, 27cm long
Cow croupon split leather docker glove, 32cm long
Split leather docker glove double on palm
Split leather docker glove double on palm
Split leather docker glove double on palm and first phalange
Split leather docker glove double on palm and first phalange
13 gauge Nylon® and fiberglass shell with bi-polymer (PU and Nitrile) coating on palm and fingers.
14 gauge Nylon® and fiberglass shell with bi-polymer (PU and Nitrile) coating on palm and half back.
Dyneema®, fiberglass and synthetic yarn gauntlet with full bi-polymer (PU + Nitrile) coating.
Dyeema®, fiberglass and synthetic yarn gauntlet with full bi-polymer (PU + nitrile)coating.
10 gauge shell of Dyneema®, glassfiber and synthetic yarns with full nitrile coating.
Dyneema® with synthetic fibers glove, bi-polymer (latex + nitrile) coating.
7 gauge acrylic terry liner on the inside and a 15 gauge Nylon® liner with HPT™ half coating.
7 gauge acrylic terry liner on the inside and a 15 gauge Nylon® liner with HPT™ half coating.
Seamless polyester/cotton glove, double Microfinish® nitrile coating on palm and thumb with protection on knuckles and fingers made of TPR (Thermoplastic Rubber).
Kevlar® mixed with steel thread glove with rough latex coating
Semaless Kevlar fibre glove with Microfinish® latex coating on palm and thumb
Cut resistant Kevlar® shell with microfinish® nitrile coating on palm and fingers.
Seamless high-density polyethylene glove mixed with glass fibre and double nitrile coating on palm, water-proof and Microfinish®.
Seamless high-density polyethylene glove mixed with glass fibre and double nitrile coating on palm and half -back, water-proof and Microfinish®.
Seamless high-density polyethylene glove mixed with glass fibre and double full nitrile coating on palm, water-proof and Microfinish®.
Nylon® and fibreglass glove with PU coating on palm
Nylon® and fibreglass glove with PU coating on palm
Nylon® glove mixed with glass fibre and other synthetic fibres. Fully coated with nitrile foam. Elastic open end on wrist.
Kevlar® fibre coated with rough latex glove
Aramide fibre glove, steel and elastane thread with NFT nitrile coating
KEVLAR® string knit. Gauge 10
KEVLAR® string knit. Gauge 7
KEVLAR® string knit. Gauge 7
KEVLAR® string knit. Gauge 7 with PVC dots on palm.
Seamless Kevlar® and Lycra® fibre glove coated with nitrile foam on palm and fingers
Kevlar® cut protection sleeve
10 gauge shell blended on Nylon®, synthetic yarn and fiberglass liner with PU coating on palm and fingers.
13 gauge shell of Dyneema®, fiberglass and polyamide with PU coating on palm and fingers.
13 gauge shell of Dyneema®, fiberglass and polyamide with PU coating on palm and half back.
Dyneema® shell with polyurethane coating
Dyneema® shell with polyurethane coating
Dyneema® fiber glove with polyurethane coating.
Dyneema® shell with polyurethane coating. Header card.
Dyneema® shell with Polyurethane coating
Dyneema® mixed with fibreglass glove with PU coating on palm
Dyneema® mixed with fibreglass glove with PU coating on palm and fingers
Dyneema® mixed with fibreglass glove with PU coating on palm and fingers. Reinforcement between index and thumb
Dyneema® fibre glove mixed with other synthetic fibres and PU coating
Dyneema® fibre glove mixed with other synthetic fibres and PU coating
Dyneema® fibre glove mixed with other synthetic fibres and PU coating
Dyneema fibre glove mixed with Nylon and elastane. Nitrile reinforcement between index finger and thumb. Produced with Dyneema Diamond 3G12 technology and PU coating on palm and fingers
Dyneema® Diamond 3GY Technology glove with Polyurethane coating on palm and fingers.
Dyneema shell with Nitrile Foam coating on palm and fingers
Dyneema shell with full Nitrile Foam coating.
Dyneema® shell with nitrile dots on both sides.
Dyneema® mixed with fibreglass sleeve
Dyneema® mixed with fibreglass glove with latex NFT coating
Dyneema glove mixed with glass fibre and NFT latex coating
Dyneema® and fibreglass glove fully dipped in crinkle latex
Dyneema® mixed with fibreglass glove with nitrile coating
Dyneema glove mixed with glass fibre and NFT latex coating
Dyneema® glove with double nitrile coating. First coating in flat green nitrile and a second coating on palm and fingers with rough black nitrile with ¿waves¿ finish.
Dyneema® mixed with Nylon® and Spandex glove, made with Dyneema® Diamond Technology 3G12 with double nitrile coating on palm.
Dyneema® fibre glove mixed with carbon fibre, Nylon and Lycra fibre. Produced with Dyneema Diamond 3G12 technology and PU coating on palm and half-back.
Double croupon split leather welder glove
Double croupon split leather welder glove
Double croupon split leather welder glove
Economic split leather welder glove
Split leather welders design glove
Economy split leather welders design glove
Economy split leather welders design glove
Premium double bend split leather welders
Premium double bend split leather welders
Premium double bend split leather welders
Grain leather glove with split leather sleeve
Grain cow glove with split leather cuff.
Grain cow glove with split leather cuff.
Synthetic leather glove with fingers reinforced in TPR, PVC fingers tips and inner Kevlar®. 8/4 Alycore® layers.
Synthetic leather glove with back palm, reinforcements on the knuckles. 5/15 Alycore® layers.
Heat resistant leather glove
Heat resistant leather glove
clear
headset_micContact

Call us on our Customer Service hotline:
+34 941 340 885

Our Customer Service hours are Monday to Thursday from 8 am to 6 pm and Fridays from 8 am to 3 pm (we are closed on Saturdays and public holidays).

Of, if you prefer, you can send us your query using this form:

Uses and solutions