Disposable gloves are a very useful product that can be used for the protection in a wide range of activities. Their main purpose is to prevent direct contact with substances harmful to health, such as chemicals. Or, of course, they can also be used to prevent damage to the hands or possible staining with dyes or oils. Juba now offers, as a novelty, boxes of disposable nitrile gloves with ten units of reference H570, a model textured all over the outside for better grip in dry, wet and oily environments. These gloves are food-grade certified and ambidextrous, so they may be used on both right and left hands. In fact, in order to better fit each professional, Juba has three different sizes: 8, 9 and 10. Nitrile is a very suitable alternative to reduce allergic reactions, especially for people intolerant to latex. Its fine, flexible texture allows for good sensitivity at the fingertips. It also optimises comfort and dexterity. Disposable gloves are a widely used resource in all industrial sectors as a protective measure, as they are essential for optimal hygiene. While they do not offer cut, heat or puncture resistance, they are essential for those who need a quick and easy layer of protection on a daily basis. These multi-purpose gloves are perfect for numerous applications and industries, such as laboratories, the chemical industry, emergency services, electronics and assembly, the food industry, food processing and, among others, industrial cleaning/maintenance. Concretely, this Juba reference protects against the following chemicals: Sodium Hydroxide 40% (level 6, >480 minutes), Ammonium Hydroxide 25% (level 1, >10 minutes), Hydrogen Peroxide (level 3, >60 minutes) and Formaldehyde 37% (level 2, >30 minutes). In any case, Juba recommends not to reuse disposable gloves, they are for single use only. In addition, once the professional has removed them, they should be disposed of in a suitable waste container. And, of course, before using any glove, always consult the technical data of each reference. If any doubt arises, you can discuss with your Customer Service to help and advise you on any purchase.  

Juba is committed to develop the most innovative products on the market, adapted to the needs of each professional sector. Many of the pruning shears incorporate a CPS system, so Juba has recently added to its catalogue, with more than 500 references, a glove focused on protecting the hands of professionals who use this type of shears. Professionals who carry out work for the growth of tree branches or vine growers must keep their hands protected with anti-cutting gloves without losing freedom of movement. Juba's new HTE100 model is a knitted glove with a locking system for electric shears made in Europe, which is ideal for use on the opposite hand to the one that handles the tool. Without a doubt, this type of glove must provide a balance between ergonomics and safety. As to protection, this reference by Juba is Personal Protective Equipment (PPE), with an anti-cut level F. This letter is the maximum achieved in the TDM test, according to the health and safety requirements specified in the EN 388:2016 standard on gloves for protection against mechanical hazards. However, a glove is useless as protective armour if it does not allow adequate breathability, if it is heavy, or if the material is so stiff that force must be exerted to perform precision movements with the fingers. Or, of course, if it does not fit the physiognomy of the professional's hand. Therefore, these new gloves from Juba's Garden range are available in a wide range of sizes. Specifically, Juba offers this reference from size 7, which corresponds to S, up to size 11 or XXL. In addition, the glove is designed with an elastic knitted cuff for improved grip on the wrist. As to packaging, Juba offers clients a minimum order of a 6-unit pack of gloves, or a 60-pair box is also available. However, HTE100 should be used in dry conditions and, of course, tested for compatibility with shears before pruning.

In its efforts to offer workwear and work gloves that meet the needs of each professional, Juba has added size 3XL to its high-visibility yellow fluorescent vest. On this occasion, the company adds a larger size for model HV174YEL, which is designed with horizontal reflective bands, in addition to a Velcro closure. Regarding the sales format, Juba markets this basic hi-visibility vest in a bag to be hung on display and be more visible to the store visitor. High-visibility vests are essential in many work environments, where maximum safety and visibility are required. In addition, Juba's high visibility references offer high technicality, durability and quality. The vest is not the only reference, Juba has in its catalogue a wide range of garments designed for low light work situations where the worker must increase his visibility to avoid any incident. All this equipment is certified with the international high visibility standard ENISO20471:2013 + A1:2016, which specifies the mandatory requirements for protective clothing capable of visually signalling the wearer's presence intended to make him visible in risky situations with any type of daylight and when illuminated in the dark by car headlights.

Hands are the main working tool in many industrial sectors. If a work protection glove is too large or, on the contrary, too small, the wearer's movements will be reduced and he may be exposed to some risks. A glove may slip if the size is too large, while grip and dexterity will be compromised if the wearer is undersized. Above all, the glove must guarantee a perfect fit to adapt to the professional's hands. Today, there are different sizes, usually ranging from 6 to 12, to ensure a good fit. As if it were a second skin, this product must protect from the palm to the fingertips. Juba has been working for nearly 70 years to provide the most suitable safety gloves for each hand. On this occasion, the company has added the new KSLX200model to its catalogue of over 500 glove references, available from size 7, which corresponds to S, up to size 11 or XXL. JJuba's new model stands out for its design with orange colour on the back of the hand and a black interior on the palm. KSLX200 is a seamless glove with a rough latex coated polyester material, which is now available in gauge 13. A recently released Juba reference that is similar to the H256, but more economical and in industrial format. What are the peculiarities of KSLX200? Great waterproof properties in the palm, providing a solid grip in dry and wet environments. In addition, this reference provides the user with good abrasion resistance and increased durability. Therefore, this glove is recommended for professionals in the gardening, do-it-yourself, plumbing, light metal structure erectors and construction/masonry sectors. Juba customers interested in this product can purchase it in different packaging: a minimum order of a pack of 10 pairs of gloves or, for those who wish a box containing 120 pairs is also available. The KSLX200 reference is a Personal Protective Equipment (PPE), which complies with the essential health and safety requirements specified in the EN 388:2016 standard on Protection Gloves against Mechanical Risks, as category II PPE.

Juba has been working for almost 70 years on offering a safe solution to all professionals and, therefore, it aims to provide the most appropriate safety gloves for each sector. On this occasion, the company has added to its catalogue of over 500 references with a glove focused on protecting the hands of beekeepers. Professionals who breed and care for hives should keep their bodies protected from possible bee stings without losing freedom of movement or preventing perspiration from the arms and hands. The new 213MGTO GARDEN model by Juba is a white-beige glove that is made of a 0.9-1.0mm thick goatskin grain leather that stands out for its great flexibility and strength. Its. Its composition is cotton canvas and goatskin leather to offer unrivalled protection against possible bee stings. Goatskin leather provides great dexterity and tact to make the job easier. The leather gloves have different types of mounting on the thumb. In this 213MGTO GARDEN model, Juba has opted for a mounted thumb to improve mobility and enable the professional to hold their beekeeping tools while working with the beehive. In addition to hand protection, this reference is fitted with a grain leather gauntlet to protect the inside of the wrist. What’s more, there’s also a 38 cm extra-long canvas sleeve with elastic rubber. This set gives full protection to the arm from bees without forgetting freedom of movement. These new beekeeping gloves from Juba are available in a wide range of sizes to fit the hands of any beekeeper. Juba has this reference from size 7, which corresponds to an S, up to 11 or XXL. With regard to packaging, Juba offers its customers a minimum order of a pack of 10 pairs of gloves or, for those wanting as such, a box containing 100 pairs. This glove is Personal Protective Equipment (PPE), which meets the essential health and safety requirements specified in EN 388:2016 Mechanical Hazard Protective Gloves, as category II PPE.

Juba’s new glove for food environments, SP4119 and its bagged version BNSP4119, with high-quality polyester support and polyurethane coating, is tested and suitable for handling a wide spectrum of food. It is not marked with ink or labels to prevent contamination. In addition, it does not release lint. Its blue support makes it more striking for easy identification in the food environment. It has a very good touch sensitivity, as its fine gauge and flexibility allow a high sensitivity and mobility of the hand to work quickly and efficiently, reducing hand fatigue.  

Dyneema® Bio-Based fibre is obtained from the combined fossil and naturally occurring raw material from waste from the wood industry; this significantly reduces the carbon footprint associated with production. Juba adds a new model to the Nature collection: DY003RF, which is manufactured with Dyneema® Bio-Based fibre and Diamond technology, which does not use glass filament to increase its cutting level. The combination of these two Dyneema® technologies results in a highly competitive glove, with the same cutting, comfort, durability and breathability features as a conventional Dyneema®; adding less environmental impact and higher skin tolerance as extra benefits. DY003RF is made of gauge 15 and coated with palm polyurethane. It is a glove designed for environments that require tact and dexterity with a medium-high risk of cuts. In addition, there is a nitrile reinforcement in the thumb area to protect the area of greatest wear and thus increase glove service life. This new Dyneema® Diamond and Juba Bio-Based model is available in sizes: 6 a 11. Click here for more information.